819804 TWO (2) NEW OEM WHEEL MOUNTING LUGS/SCREWS/BOLTS 7/16"-20 X 1.75" CUSHMAN PART TRUCKSTER HAULSTER

$19.99

CONTINUE SHOPPING

  • SO THESE ARE SHAFT DIAMETER OF 7/16" AND 20 THREADS PER INCH.

  • THE MEASUREMENT OF THE SHAFT UNDER THE HEAD IS 1.75".

  • THE MOUNTING AREA/KNURL IS .465" WIDE.

  • THE MOUNTING PART-THE KNURL IS FATTER THAN 7/16" BUT YOU POUND OR PRESS IT IN PLACE.

  • YOU WOULD USE THESE IN THE BRAKE DRUM AND HUB WITH THE 7/16" HOLE.

  • THESE ARE MAINLY FOR THE FRONT OF THE VEHICLE OF THE 80'S AND NEWER MODELS, BUT APPLICATIONS MAY VARY.

  • PLEASE LOOK AT YOUR LUGS CAREFULLY BEFORE YOU PURCHASE.

  • THIS IS FOR MULTIPLE MODELS OF CUSHMAN TRUCKSTER/HAULSTER SCOOTERS/MOTORCYCLES/VEHICLES.

CONTINUE SHOPPING

  • SO THESE ARE SHAFT DIAMETER OF 7/16" AND 20 THREADS PER INCH.

  • THE MEASUREMENT OF THE SHAFT UNDER THE HEAD IS 1.75".

  • THE MOUNTING AREA/KNURL IS .465" WIDE.

  • THE MOUNTING PART-THE KNURL IS FATTER THAN 7/16" BUT YOU POUND OR PRESS IT IN PLACE.

  • YOU WOULD USE THESE IN THE BRAKE DRUM AND HUB WITH THE 7/16" HOLE.

  • THESE ARE MAINLY FOR THE FRONT OF THE VEHICLE OF THE 80'S AND NEWER MODELS, BUT APPLICATIONS MAY VARY.

  • PLEASE LOOK AT YOUR LUGS CAREFULLY BEFORE YOU PURCHASE.

  • THIS IS FOR MULTIPLE MODELS OF CUSHMAN TRUCKSTER/HAULSTER SCOOTERS/MOTORCYCLES/VEHICLES.

You Might Also Like